User`s guide

Getting Started 2

Agilent 34980A Mainframe User’s Guide 59

Sending SCPI Commands Via the Web Interface

The Web Interface provides a utility to send SCPI commands to the

34980A via the SCPI Command Interface window. The procedure below

shows how to access this window and send commands.

1 Press the Commands button at the top of the Web Browser Control

page to launch the SCPI Command Interface window.

2 The SCPI Command Interface window allows you to:

a Set the time to wait for a command response from the instrument.

NOTE

You m ust be in the Allow Full Control mode to send instrument

commands to the 34980A.