User`s guide

Getting Started 2

Agilent 34980A Mainframe User’s Guide 57

Closing and Opening Channel Relays

1 To close a channel, left- click directly on the graphic of the desired

relay. To open a closed channel, click again on the relay graphic.

2 You can also open and close the four Analog Bus relays by

left- clicking the graphics of these relays. The

Analog Bus Overview

display located near the top of the window shows the slot- by- slot

status of the four Analog Buses.

NOTE

You m ust be in the Allow Full Control mode to close and open

channels.