User`s guide

56 Agilent 34980A Mainframe User’s Guide
2 Getting Started
Selecting the “Allow Full Control” Mode
Select the Allow Full Control radio button as shown. Once enabled, this
mode allows you to open and close channel relays and modify the state
of the installed modules.
Setting a Web Browser Password
If desired, you can control access to the 34980A Web Interface using
password protection. As shipped from the factory, no password is set.
To set a password (available from the front panel only), navigate to the
WEB PASSWORD menu selection from the 34980A front panel, as
follows:
Utility > REMOTE I/O > LAN > LAN SETTINGS > MODIFY > . . . WEB
PASSWORD
Use the front panel knob and control keys to enter your password, then
press Exit Menu to save it.
Once specified, this password must be provided to transition from the
Observe Only mode to the Allow Full Control mode