User`s guide

Getting Started 2
Agilent 34980A Mainframe User’s Guide 43
6
Use the knob to select the 100 mV range for the dc voltage function.
7 Continue pressing the lighted Channel key until CHANNEL LABEL is
shown.
8 At the CHANNEL LABEL choice, use the knob (to select alphanumeric
characters) and the arrow keys (to select the cursor position) to enter
a custom channel label.
9 Press the lighted Channel key to save the assigned channel label and
all other changes you made.
10 Press the Channel key (in the Measure key group). Note that the key
lights, the required relays automatically close, and dc voltage
measurements begin.
10