User`s guide

Getting Started 2

Agilent 34980A Mainframe User’s Guide 41

Within the Measure key group, press DMM.

Note that the key lights and continuous ac voltage measurements are

made using the internal DMM.

8 To stop the measurements, press DMM (in the Measure key group).

During This Tutorial Example:

• You configured the internal DMM for ac voltage measurements,

• You started measurements, viewed continuous measurement results,

and stopped the measurements.

Since you didn't open or close any channels, no module or Analog Bus

relays were exercised in this example. The internal DMM acted as a

stand- alone instrument and measured whatever ac voltages happened to

be present on the Analog Buses. Pressing DMM (in the Measure key

group) also allowed you to continuously monitor measurements on the

front panel.