User`s guide

Introduction to the Plug-In Modules for the 34980A 4
Agilent 34980A Mainframe User’s Guide 167
Interconnection Solutions Overview
Depending on your specific requirements, you can connect your DUT 
to the 34980A using the following optional interconnection solutions. 
See the 34980A Product Data Sheet for additional information. See
“Installing and Connecting Modules" on page 26 for specific module
installation and wiring instructions.
Terminal Blocks Detachable terminal blocks are available for the
low- frequency modules and offer a flexible method for connecting
external wiring (300V rated). Each terminal block is customized for 
a specific module (not available for RF and microwave modules).
Ordering Information: 349xxT (e.g., 34921T, 34922T, etc.)
Shielded Cables Standard cables are available for 50- pin D- sub and 
78- pin D- sub connectors. Depending on the module and your specific
requirements, one or two cables may be required per module.
Ordering Information: 
Y1135A (1.5 meters, 50- pin D- sub, 300V)
Y1136A (3 meters, 50- pin D- sub, 300V)
Y1137A (1.5 meters, 78- pin D- sub, 300V)
Y1138A (3 meters, 78- pin D- sub, 300V)
Solder Cup Connector Kits These connector kits are available if you want
to build your own custom cables.
Ordering Information: 
Y1139A (50- pin D- sub female, 125V, for
34921/23/25/31/32/33/37/38)
Y1140A (78- pin D- sub female, 60V, for 34922/24)
Y1141A (50- pin D- sub male, 125V, for 34951/52)
Y1142A (78- pin D- sub male, 60V, for 34950)
Solder Cup Connectors
(50- or 78-Pin D-Sub)
300V Shielded Cables
(50- or 78-Pin D-Sub)
349xxT Terminal Block
(Module Specific)