User manual

288 Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide
Multitone and Two–Tone Waveforms (Option 430)
Us in g Tw o– Ton e M od u l at io n
Using Two–Ton e Modulation
In the following sections, this chapter describes the two–tone mode, which is available only in
N5162A/82A Agilent MXG Vector signal generators with Option 430:
• Creating a Two–Tone Waveform on page 289
• Viewing a Two–Tone Waveform on page 290
• Minimizing Carrier Feedthrough on page 291
• Changing the Alignment of a Two–Tone Waveform on page 292
See also: Saving a Waveform’s Settings & Parameters on page 141
NOTE For more information about two–tone waveform characteristics, and the two–tone standard,
download Application Note 1410 from our website by going to http://www.agilent.com and
searching for “AN 1410” in Test & Measurement.