User`s guide

Series N6700 User’s Guide 61
4
Operating the Power System
Programming the Output ................................................................................. 62
Synchronizing Output Steps ............................................................................ 68
Programming Output Lists ............................................................................... 72
Making Measurements .................................................................................... 77
Using the Digitizer ............................................................................................. 79
Using the Protection Functions ...................................................................... 87
External Data Logging ...................................................................................... 91
System-Related Operations ............................................................................. 95
This chapter contains examples on how to operate your power
system from the front panel and over the remote interface using SCPI
commands.
For complete details on the SCPI (Standard Commands for
Programmable Instruments) commands, refer to the Programmer’s
Reference Help file included on the Agilent N6700 Product Reference
CD. This CD-ROM is shipped along with your instrument.
The simple examples discussed in this chapter show you how to
program:
 Output voltage and current functions
 Output triggers
 Measurement functions
 Measurement triggers
 Protection functions
 System functions
Refer to Appendix B for information about using the Digital Port on
the back of your instrument.
Refer to Appendix C for information about using the power
allocation function.