User`s guide

Installation 2
Series N6700 User’s Guide 25
Items Supplied
Mainframe Items Description Part Number
Power Cord A power cord suitable for your location. Call Agilent Sales & Support Office
Ferrite Core Installs on power cord to reduce common mode currents. Agilent 9170-2131
Digital Connector plug 8-pin connector for connecting signal lines to the digital port. Agilent 1253-6408
Phoenix Contact MC 1,5/8-ST-3,5
Product Reference CD-ROM Includes drivers and documentation. Agilent 5969-2914
Automation-Ready CD-ROM Contains Agilent IO Libraries Suite. Agilent E2094N
Quick Reference Guide Contains quick reference information. Agilent 5969-2950
T-10 Torx tool
Torx tool for installing or removing power modules.
Agilent 8710-2416
Power Module Items
8 A Output Connector plug One 8 A, 8-pin connector plug for connecting power and sense
leads. Only used in N678xA SMU.
Agilent 1253-6408
Phoenix Contact MC 1,5/8-ST-3,5
12 A Output Connector plug One 12 A, 4-pin connector plug for connecting power and
sense leads. Used in all except N6731B, N6741B, N6753A-
N6756A, N6763A-N6766A, N6773A, N678xA SMU.
Agilent 1253-5826
Phoenix Contact MSTB 2,5/4-STF
20 A Output Connector plug One 20 A, 4-pin connector plug for connecting power and
sense leads. Only used in N6731B, N6741B, N6754A, N6756A,
N6764A, N6766A, N6773A.
Agilent 1253-6211
Phoenix Contact PC 4/4-ST-7,62
50 A Output Connector plug One 50 A, 2-pin connector plug for connecting power leads.
Only used in N6753A, N6755A, N6763A, N6765A.
Agilent 1253-7187
Molex 39422-0002
AUX Measurement
connector plug
A 2-pin connector plug for connecting the auxiliary
measurement inputs. Only used in N6781A.
Agilent 1253-8485
Phoenix Contact FMC 1,5/2-ST-3,5
Small Sense Jumpers
Two small jumpers for local sensing at the output connector.
Used in all except N6731B, N6741B, N6753A-N6756A,
N6763A-N6766A, N6773A, N678xA SMU.
Agilent 8120-8821
Phoenix Contact EPB 2-5(1733169)
Large Sense Jumpers Two large jumpers for local sensing at the output connector.
Only used in N6731B, N6741B, N6754A, N6756A, N6764A,
N6766A, N6773A.
Agilent 0360-2935
Phoenix Contact 3118151
Sense Connector A 4-pin connector for connecting sense leads. Wires (p/n
5185-8847) are used for local sensing. Only used in N6753A,
N6755A, N6763A, N6765A.
Agilent 1253-5830
Phoenix Contact MC 1,5/4-ST-3,5
Module Cal. Certificate A certificate of calibration referenced to the serial number. N/A
Inspecting the Unit
When you receive your power system, inspect it for any obvious
damage that may have occurred during shipment. If there is damage,
notify the shipping carrier and nearest Agilent Sales and Support
Office immediately. Refer to
www.agilent.com/find/assist.
Until you have checked out the power system, save the shipping
carton and packing materials in case the unit has to be returned.
Check the list under “Items Supplied” and verify that you have
received these items with your instrument. If anything is missing,
please contact your nearest Agilent Sales and Support Office.