User`s guide

Quick Reference 1
Series N6700 User’s Guide 21
SCPI Command Description
STATus
:OPERation
[:EVENt]? (@chanlist) Returns the value of the operation event register
:CONDition? (@chanlist) Returns the value of the operation condition register
:ENABle <NRf>, (@chanlist) Enables specific bits in the Event register
:NTRansition <NRf>, (@chanlist) Sets the Negative transition filter
:PTRansition <NRf>, (@chanlist) Sets the Positive transition filter
:PRESet Presets all enable and transition registers to power-on
:QUEStionable
[:EVENt]? (@chanlist) Returns the value of the questionable event register
:CONDition? (@chanlist) Returns the value of the questionable condition register
:ENABle <NRf>, (@chanlist) Enables specific bits in the Event register
:NTRansition <NRf>, (@chanlist) Sets the Negative transition filter
:PTRansition <NRf>, (@chanlist) Sets the Positive transition filter
SYSTem
:CHANnel
[:COUNt]? Returns the number of output channels in a mainframe
:MODel? (@chanlist) Returns the model number of the selected channel
:OPTion? (@chanlist) Returns the option installed in the selected channel
:SERial? (@chanlist) Returns the serial number of the selected channel
:COMMunicate
:RLSTate LOCal | REMote | RWLock Specifies the Remote/Local state of the instrument
:TCPip:CONTrol? Returns the control connection port number
:ERRor? Returns the error number and error string
:GROup (Group commands do NOT apply to N678xA SMU)
:CATalog? Returns the groups that have been defined
:DEFine (@chanlist) Group multiple channels to create a single output
:DELete <channel> Removes the specified channel from a group
:ALL Ungroups all channels
:PASSword:FPANel:RESet Resets the front panel lock password to zero
:REBoot Returns the unit to its power-on state
:VERSion? Returns the SCPI version number
TRIGger
:ACQuire (Acquire commands only on N676xA, N678xA SMU and Option 054)
[:IMMediate] (@chanlist) Triggers the measurement immediately
:CURRent
[:LEVel] <NRf>, (@chanlist) Sets the current trigger level
:SLOPe POSitive | NEGative, (@chanlist) Sets the current trigger slope
:SOURce BUS | CURRent<1-4> | EXTernal | PIN<1-7>
| TRANsient<1-4> | VOLTage<1-4>, (@chanlist)
Sets the measurement trigger source
:TOUTput[:ENABle] <Bool>, (@chanlist) Enables measurement triggers to be sent to a digital port pin
:VOLTage
[:LEVel] <NRf>, (@chanlist) Sets the voltage trigger level
:SLOPe POSitive | NEGative, (@chanlist) Sets the voltage trigger slope
:ELOG
[:IMMediate] (@chanlist) Triggers the external data log immediately
:SOURce BUS|EXTernal|IMMediate|PIN<1-7>, (@chanlist)
Sets the external data log trigger source
:TRANsient
[:IMMediate] (@chanlist) Triggers the output immediately
:SOURce BUS | EXTernal | IMMediate | PIN<1-7>
| TRANsient<1-4>, (@chanlist)
Sets the output trigger source