User`s guide

Quick Reference 1
Series N6700 User’s Guide 17
SCPI Command Description
FETCh[:SCALar] (continued)
:POWer
[:DC]? (@chanlist)
Returns the average output power
:VOLTage
[:DC]? (@chanlist)
Returns the average voltage
:ACDC? (@chanlist)
Returns the total rms voltage (AC + DC)
:HIGH? (@chanlist)
Returns the high level of a voltage pulse
:LOW? (@chanlist)
Returns the low level of a voltage pulse
:MAXimum? (@chanlist)
Returns the maximum voltage
:MINimum? (@chanlist)
Returns the minimum voltage
:ARRay
:CURRent [:DC]? (@chanlist)
Returns the instantaneous output current
:POWer [:DC]? (@chanlist)
Returns the instantaneous output power
:VOLTage [:DC]? (@chanlist)
Returns the instantaneous output voltage
:ELOG <NR1>, (@chanlist)
Returns the most recent external data log records
FORMat
[:DATA] ASCII | REAL
Returns data as ASCII or binary
:BORDer NORMal | SWAPped
Sets the byte order of the external data log data
INITiate
[:IMMediate]
(Acquire command only on N676xA, N678xA SMU and Option 054)
:ACQuire (@chanlist)
Enables the measurement system to receive triggers
:ELOG (@chanlist)
Enables external data log measurements
:TRANsient (@chanlist)
Enables the output transient system to receive triggers
:CONTinuous
:TRANsient <Bool>, (@chanlist)
Enables/disables continuous transient triggers
MEASure
[:SCALar]
:CURRent
[:DC]? (@chanlist)
Takes a measurement; returns the average current
:ACDC? (@chanlist)
Takes a measurement; returns the total rms current (AC + DC)
:HIGH? (@chanlist)
Takes a measurement; returns the high level of a current pulse
:LOW? (@chanlist)
Takes a measurement; returns the low level of a current pulse
:MAXimum? (@chanlist)
Takes a measurement, returns the maximum current
:MINimum? (@chanlist)
Takes a measurement, returns the minimum current
:POWer
[:DC]? (@chanlist)
Takes a measurement, returns the average output power
:VOLTage
[:DC]? (@chanlist)
Takes a measurement; returns the average voltage
:ACDC? (@chanlist)
Takes a measurement; returns the total rms voltage (AC + DC)
:HIGH? (@chanlist)
Takes a measurement; returns the high level of a voltage pulse
:LOW? (@chanlist)
Takes a measurement; returns the low level of a voltage pulse
:MAXimum? (@chanlist)
Takes a measurement, returns the maximum voltage
:MINimum? (@chanlist)
Takes a measurement, returns the minimum voltage
:ARRay
(Array commands only on N676xA, N678xA SMU and Option 054)
:CURRent [:DC]? (@chanlist)
Takes a measurement; returns the instantaneous output current
:POWer [:DC]? (@chanlist)
Takes a measurement; returns the instantaneous output power
:VOLTage [:DC]? (@chanlist)
Takes a measurement; returns the instantaneous output voltage