User`s guide

Power Allocation Appendix C

Series N6700 User’s Guide 111

For Agilent Models N678xA SMU, the power limit function does not

apply.

Module Power Allocation

The following commands program the module power limit function:

Front Panel: SCPI Command:

Select Output\Advanced\Power.

Enter a power limit for each output.

To set a power limit on output 1:

POW:LIM 100,(@1)

To query the power limits that are set, send:

Front Panel: SCPI Command:

Select Output\Advanced\Power.

The power allocation for all output

channels is displayed in the dialog boxes.

POW:LIM? (@1:4)

To return all output channels to their default settings, you can either

cycle AC power or send the following commands:

Front Panel:

SCPI Command:

Select States\Reset

*RST

POW:LIM MAX,(@1:4)

NOTE

When an output channel is set to MAX, it returns to its maximum rated value,

and the power limit function will not activate.