Specifications

Front Panel
In addition to full control over
its three standard interfaces, the
N6700 has a full featured front
panel to permit easy manual
operation for test prototyping,
debugging, and troubleshooting
when used in an ATE system.
You can have confidence that
the N6700 is working properly
because you can view the
settings and actual output
values on all four outputs at
the same time.
Universal AC Input
The N6700 has a universal input
that operates from 100-240 Vac,
50/60/400 Hz. There are no
switches to set or fuses to
change when switching from
one voltage standard to another.
The AC input employs power
factor correction.
Quick Disconnects
Each power module has quick
disconnects for easy system
setup and maintenance.
Rack Mount Kit
The N6700 is easily rack-mounted
using available option #908.
This kit provides all the neces-
sary hardware to rack mount
one N6700B mainframe in only
1U of rack space. This rack
mount kit includes front rack
ears and rear supports which
take the place of standard rack
rails and/or slides. Note that
standard rack rails or slides
are not needed and are not
compatible with the N6700B
because of its 1U size and
airflow requirements.
5
Figure 3. Front panel with up to 4 channels displayed simultaneously (Picture shows 3 channels installed.)
Figure 4. Rear panel (Picture shows 3 channels installed.)
Figure 5. Quick disconnects for power and sense leads