Specifications

16
Supplemental Characteristics (Continued)
Supplemental characteristics are not warranted but are descriptions of performance determined either by design or type testing.
All characteristics are typical unless otherwise noted.
N6751A / N6752A N6761A / N6762A
Up-programming Time with full resistive load:
(time from 10% to 90% of total voltage excursion)
Voltage setting from 0 V to 10 V 0.2 ms 0.6 ms
Voltage setting from 0 V to 50 V 1.5 ms 2.2 ms
Up-programming Settling Time with full resistive load:
(time from start of voltge change to within 50 mV of final value))
Voltage setting from 0 V to 10 V 0.5 ms 0.9 ms
Voltage setting from 0 V to 50 V 4 ms 4 ms
Down-programming Time with no load:
(time from start of voltage change to output voltage < 0.5 V)
Voltage setting from 10 V to 0 V 0.3 ms 0.3 ms
Voltage setting from 50 V to 0 V 1.3 ms 1.3 ms
Down-programming Settling Time with no load:
(time from start of voltage change to output voltage
within 50 mV of final value)
Voltage setting from 10 V to 0 V 0.45 ms 0.45 ms
Voltage setting from 50 V to 0 V 1.4 ms 1.4 ms
Down-programming Time with 1000 µF load:
(time from start of voltage change to output voltage < 0.5 V)
Voltage setting from 10 V to 0 V 2.1 ms 4.5 ms
Voltage setting from 50 V to 0 V 11 ms 23 ms