Agilent N6700 MPS Low-Profile Modular Power System Models: N6700B, N6710B, N6731B-36B, N6741B-46B, N6751A, N6752A, N6761A, N6762A Product Overview New! Higher voltage and higher current models • Ideal for ATE systems in R&D, Design Validation, and Manufacturing • Small size: up to 4 outputs in 1U of rack space • Flexible, modular system: Can mix and match power levels and performance levels to optimize investment • Performance modules for critical test requirements • Value modules for basic DC power requir
Small Size and Flexibility for ATE Power supplies are a fundamental component of every test system in industries including aerospace and defense, consumer electronics, computers and peripherals, communications, semiconductor and automotive electronics. Today’s complex automatic test equipment (ATE) systems often require multiple power sources.
Protection Features Each N6700 module is protected against over-voltage, overcurrent, and over-temperature. A fault condition in one module can be detected within 10 microseconds by other modules so that they can be quickly shut down to avoid hazardous conditions on your DUT. Output on V1 Module 1 V2 Delay 2 Connectivity The N6700 MPS comes standard with GPIB, USB 2.0, and 10/100 Base-T Ethernet LAN interfaces.
Programmable Voltage Slew For some applications, like inrush limiting or powering rate-sensitive devices, it is necessary to slow down and control the speed of the power supply to maintain a specific voltage slew rate. The N6700 provides programmable voltage slew rate, so that with a single command, you can generate a 0 V to full-scale voltage change controllable from 1 millisecond to 10 seconds.
Figure 3. Front panel with up to 4 channels displayed simultaneously (Picture shows 3 channels installed.) Figure 4. Rear panel (Picture shows 3 channels installed.) Front Panel In addition to full control over its three standard interfaces, the N6700 has a full featured front panel to permit easy manual operation for test prototyping, debugging, and troubleshooting when used in an ATE system.
Choosing the right DC Power Modules to meet your ATE needs measurement accuracy when viewing high-speed transient or pulse events within the deviceunder-test (DUT). In addition, autoranging output capabilities enable one power supply to do the job of several traditional power supplies.
The N6750 and N6760 Families: Performance Modules for when the power supply is a critical part of your testing When your testing requires a power supply to do more than just provide a constant DC level, the N6750 family of HighPerformance, Autoranging DC Power Modules and the N6760 family of Precision DC Power Modules are the perfect fit. These modules combine a fast output with flexible controls and sophisticated measurements. The N6750/60 is more than a power supply; it is a stimulus/response instrument.
due to its extended voltage and current range, can produce voltage and current combinations in the range of a 250 W non-autoranging power supply. Voltage The flexibility of autoranging is useful when the DUT operates over a wide range of voltages, when the ATE system needs to test a wide range of DUTs, or when margin is needed because the ATE power supply must be selected before final DUT power requirements are determined.
Figure 8. High Speed Test Extensions Digitizer adds “oscilloscope-like” data capture While some applications require fast risetime and/or falltimes, some devices can actually be harmed by a power supply that is too fast. For these cases, the LIST mode of the N6700 can be used to “slow down” the output. For this application, you create a slow ramp of output voltage by dividing the total voltage excursion into a smaller number of steps and dwell at each step for some amount of time.
For applications such as design validation of battery powered digital devices, the ability to capture dynamic information about the current flowing into the DUT allows designers to better understand the current drain on DUT batteries and optimize DUT power management during normal DUT operation and in DUT standby mode. The digitizer can also be synchronized with changes in the output.
If you are using Agilent Multiple-Output System DC Power Supplies Now The N6730 and N6740 Families: Basic Modules when you just need a simple power supply Models Not all applications require high performance power supplies. When your budget is tight, and when speed and accuracy are a low consideration, the Agilent N6700 LowProfile MPS supports basic DC power modules that provide an economical solution. The N6730 and N6740 families give you clean, reliable DC power without advanced features.
The table below illustrates these points and how it may be easier, faster, and more economical to purchase an N6730/40 programmable DC Power Module in place of a fixed-output DC Power Supply. All the benefits of the N6700 MPS at a low price While the N6730/40 are economical solutions to basic DC power requirements, they are also part of the N6700 MPS.
Performance Specifications Unless otherwise noted, specifications are warranted over the ambient temperature range of 0 to 55°C, and derated above 40°C. N6751A / N6752A N6761A / N6762A 50 V 5 A / 10 A 50 W / 100 W 50 V 1.5 A / 3 A 50 W / 100 W CV peak-to-peak 1 CV rms 6 mV 1 mV 6 mV 1 mV Voltage Current 2 mV 2 mA 0.5 mV 30 µA Voltage Current 1 mV 1 mA 1 mV 30 µA Voltage high range Voltage low range (≤ 5.
Performance Specifications (Continued) Unless otherwise noted, specifications are warranted over the ambient temperature range of 0 to 55°C, and derated above 40°C. N6731B/ N6741B N6732B/ N6742B N6733B/ N6743B N6734B/ N6744B N6735B/ N6745B N6736B/ N6746B 5V 10 A / 20 A 50 W / 100 W 8V 6.25 A / 12.5 A 50 W / 100 W 20 V 2.5 A / 5 A 50 W / 100 W 35 V 1.5 A / 3 A 50 W / 100 W 60 V 0.8 A / 1.6 A 50 W / 100 W 100 V 0.
Supplemental Characteristics Supplemental characteristics are not warranted but are descriptions of performance determined either by design or type testing. All characteristics are typical unless otherwise noted. N6751A / N6752A N6761A / N6762A Voltage high range Voltage low range (≤ 5.5 V) Current high range Current low range (≤ 0.1 A) 20 mV – 51 V N/A 10 mA – 5.1 A/10 mA – 10.2 A N/A 15 mV – 51 V 12 mV – 5.5 V 1 mA – 1.53 A/1 mA – 3.06 A 0.1 mA – 0.1 A Voltage high range Voltage low range (≤ 5.
Supplemental Characteristics (Continued) Supplemental characteristics are not warranted but are descriptions of performance determined either by design or type testing. All characteristics are typical unless otherwise noted. N6751A / N6752A N6761A / N6762A 0.2 ms 1.5 ms 0.6 ms 2.2 ms 0.5 ms 4 ms 0.9 ms 4 ms 0.3 ms 1.3 ms 0.3 ms 1.3 ms 0.45 ms 1.4 ms 0.45 ms 1.4 ms 2.1 ms 11 ms 4.
Supplemental Characteristics (Continued) Supplemental characteristics are not warranted but are descriptions of performance determined either by design or type testing. All characteristics are typical unless otherwise noted. N6731B/ N6741B N6732B/ N6742B N6733B/ N6743B N6734B/ N6744B N6735B/ N6745B N6736B/ N6746B Voltage 15 mV – 5.1 V 15 mV – 8 .16 V 30 mV – 20.4 V 40 mV – 35.7 V 70 mV – 61 V 100 mV – 102 V Current 60 mA – 10.2 A/ 60 mA – 20.4 A 40 mA – 6.375 A/ 40 mA – 12.75 A 10 mA – 2.
Supplemental Characteristics (Continued) Supplemental characteristics are not warranted but are descriptions of performance determined either by design or type testing. All characteristics are typical unless otherwise noted.
Supplemental Characteristics (Continued) Supplemental characteristics are not warranted but are descriptions of performance determined either by design or type testing. All characteristics are typical unless otherwise noted. N6700B MPS Mainframe Regulatory Compliance EMC Complies with the European EMC directive 89/336/EEC for Class A test and measurement products. Complies with the Australian standard and carries the C-Tick mark. This ISM device complies with Canadian ICES-001.
Agilent N67xxA Option Characteristics Output Relay Option Mechanical relays that break conduction path on + output, - output, + sense, - sense. Relays sequenced to ensure no loss of control when sense lines are opened.
Right Side Outline Diagram 571.5 mm 22.5" Top of Unit 549.7 mm 21.64" 25.4 mm 1.00" 432.5 mm 17.03" 44.45 mm 1.75" 482.6 mm 19.00" Agilent Technologies = Airflow 425.45 mm 16.
Ordering Information The N6700 Modular Power System is available 2 ways: (1) You can order an N6700B mainframe and various modules as separate products. (See steps below.) Each item will arrive in a separate box such that you can assemble the system yourself when you need to. Mainframe N6700B Low-Profile Modular Power System Mainframe Holds 1 to 4 modules. Available options to N6700B N6700B-908 Rack Mount Kit Required for rack mounting. Standard rack mount hardware will not work.
Ordering Information Modules Order 1 to 4 modules to be installed into each N6700B mainframe. (To order modules as part of N6710B, see page 25.) You can individually specify each option for each module. For example, you can order the one module with Option 761 Output Disconnect Relays, while the remaining modules have no relay option.
Ordering Information N6710B Systems To purchase an N6710 Modular Power System, order an N6710B. The N6710B is a build-to-order system that is shipped as a fully tested and assembled multiple-output power supply. Each N6710B consists of 1 N6700B mainframe plus optionally 1 to 4 modules. To specify which modules you want installed in the N6710B, modules are ordered as options to the N6710B. If you order less than 4 modules, the empty slots will be automatically filled with blank filler panels.
Ordering Information Modules as options to N6710B To order a module as an option to an N6710B, specify its model number, followed by “–ATO”. For example, to order an N6731B as an option to the N6710B, you would specify “N6731B –ATO” as the option. (To order modules as separate products, see page 23.) Module options for N6710B System You can individually specify each option for each module.
Compatibility and Upgrade Information You have with firmware and with modules If you want to … … here is what you need to do N6710A or N6700A Any version starting with A (example: A.00.00) Any combination of modules with model number N673xA, N674xA, N675xA or N676xA Add more modules with model numbers N673xA, N674xA, N675xA, or N676xA Capability available with your current version of hardware and firmware; No upgrade required.
Compatibility and Upgrade Information (Continued) You have with firmware and with modules If you want to … … here is what you need to do N6721A thru N6729A Any version starting with A (example: A.00.00) Any combination of modules with model number N675xA or N676xA Add more modules with model numbers N675xA or N676xA Capability available with your current version of hardware and firmware; No upgrade required.
Agilent Technologies’ Test and Measurement Support, Services, and Assistance Agilent Technologies aims to maximize the value you receive, while minimizing your risk and problems. We strive to ensure that you get the test and measurement capabilities you paid for and obtain the support you need. Our extensive support resources and services can help you choose the right Agilent products for your applications and apply them successfully. Every instrument and system we sell has a global warranty.
