Specifications

1 Introduction
6 Series N6700 Service Guide
Returning an Instrument
Before returning your instrument to Agilent Technologies for service
or repair, perform the “Preliminary Checkout” procedures in the
beginning of chapter 4.
Warranty Repair
If your instrument fails during the warranty period, Agilent
Technologies will replace or repair it free of charge. After your
warranty expires, Agilent Technologies will replace or repair it at a
competitive price. The standard repair process is “whole unit
exchange”. The replacement units are fully refurbished and are
shipped with new calibration certificates.
Contact your nearest Agilent Technologies Service Center. They will
arrange to have your instrument repaired or replaced.
Repackaging for Shipment
If the unit is to be shipped to Agilent Technologies for service or
repair, be sure to:
 Attach a tag to the unit identifying the owner and indicating the
required service or repair. Include the model and serial number.
 Place the unit in its original container with the appropriate
packaging material and secure the container with strong tape or
metal bands.
If the original shipping container is not available, place your unit in a
container that will ensure at least 4 inches of compressible packaging
material around all sides for the instrument. Use static-free
packaging materials to avoid additional damage to your unit.
Agilent Technologies suggests that you always insure shipments.
Instrument Identification
Serial Number
Agilent N6700 MPS mainframes are identified by the serial number
located on the interface cover.
The serial number consists of a 10-character number (e.g.
MY24D00013) located on the label on the top of the interface board.
The first two characters indicate the country of manufacture, and the
last five digits are a sequential number assigned to each mainframe.