Specifications
Appendix B Backdating
112 Series N6700 Service Guide
Menu Command Control Description
System
DigPort
Pin 1
Function
Specifies the pin function: DigIO, TrigIn, TrigOut, DigIn, or FaultOut..
Polarity Specifies the pin polarity.
Pin 2
Function
Specifies the pin function: DigIO, TrigIn, TrigOut, or DigIn.
Polarity Specifies the pin polarity.
Pin 3 Function Specifies the pin function: DigIO, TrigIn, TrigOut, DigIn, or InhibitIn.
Polarity Specifies the pin polarity.
Data Sends/reads data from the digital I/O port function
Preferences Display Configures Screen saver, Wake-on I/O, and Display contrast.
Keys Enables/disables key clicks and configures the On/Off key.
Security
ResetNVRam
Resets all non-volatile RAM settings to their factory defaults.
Error Displays the Error log.
Calibrate State Enables/disables calibration. You must supply a password to enable.
Sequence VProg High Enters measured data for high calibration point.
Low Enters measured data for low calibration point.
VMeas Enters measured data.
CMRR Calibrates common mode rejection ratio.
IProg High Enters measured data for high calibration point.
Low Enters measured data for low calibration point.
IMeas Enters Measured data.
DPRog Calibrates the downprogrammer.
IPeak Calibrates I peak.
Date Saves the calibration date for each channel.
Save Saves the calibration data.
Password
Changes the password.
About Frame Displays model, serial number, firmware revision, backup revision,
and active firmware.
Module Displays model, serial number, options, voltage, current, and power.