Programming instructions

Command Reference
Power Subsystem ([:SOURce])
Chapter 4 287
:POWer[:LEVel][:IMMediate][:AMPLitude]
Supported All
[:SOURce]:POWer[:LEVel][:IMMediate][:AMPLitude] <val><unit>
[:SOURce]:POWer[:LEVel][:IMMediate][:AMPLitude]?
This command sets the RF output power.
*RST
−
1.35000000E
+
002
Key Entry
Amplitude
Remarks The ranges for this command are specified values from the data sheet.
Range 20 GHz Models: E8241A & E8251A
Frequency range Standard Option 1EA
250kHZ−3.2GHZ −20 to 13DBM −20 to 16DBM
> 3.2−20GHZ −20 to 13DBM −20 to 20DBM
With Option 1E1
Frequency range Standard Option 1EA
250kHZ−3.2GHZ −135 to 11DBM −135 to 15DBM
> 3.2−20GHZ −135 to 11DBM −135 to 18DBM
40 GHz Models: E8244A & E8254A
Frequency range Standard Option 1EA
250kHZ−3.2GHZ −20 to 9DBM −20 to 15DBM
> 3.2−20GHZ −20 to 9DBM −20 to 18DBM
> 20−40GHZ −20 to 9DBM −20 to 14DBM
With Option 1E1
Frequency range Standard Option 1EA
250kHZ−3.2GHZ −135 to 7DBM −135 to 14DBM
> 3.2−20GHZ −135 to 7DBM −135 to 16DBM
> 20−40GHZ −135 to 7DBM −135 to 12DBM