Specifications
8
Page 15
安捷倫科技高頻元件量測研討會
Feb.23, 2006
10 MHz
Ref
Typical Hardware Setup For Wideband Detection
Point-in-Pulse and Pulse-to-Pulse
Output 1
Src Out
Ref In
Cplr Thru
DUT
Output 2
To TRIG IN (rear panel)
External pulse generator (e.g., 81110A/81111A)
Z5623A H81
2-20 GHz RF modulator
PNA (20, 40, 50, or 67 GHz) with:
• 014 Configurable test set
• UNL Source attenuators
• 080 Frequency offset mode
Note: pulse generator controls timing
Additional PNA setup:
•step sweep
• frequency offset on (0 Hz)
• Auto IF gain = off
Page 16
安捷倫科技高頻元件量測研討會
Feb.23, 2006
Alternate Hardware Setup For Wideband Detection
Output 1
Src Out
Ref In
Cplr Thru
DUT
Output 2
TRIG OUT (rear panel) to pulse gen EXT INPUT
External pulse generator
(e.g., 81110A/81111A)
Z5623A H81
2-20 GHz RF modulator
PNA (20, 40, 50, or 67 GHz) with:
• 014 Configurable test set
• UNL Source attenuators
• 080 Frequency offset mode
Additional PNA setup:
•step sweep
• frequency offset on (0 Hz)
• Auto IF gain = off
Note: PNA controls timing
10 MHz
Ref