User manual

Operating Procedures 4
N9360A Multi UE Tester GSM User Manual 4-47
Step 12
Change the channel with the following operation.
Move the cursor to TCH input field and press the CURSOR
CONTROL knob. Rotate the CURSOR CONTROL knob to select
the channel for handover. Press the CURSOR CONTROL knob.
Then, the Handover step is highlighted and the channel changes
to the selected channel. When handover is completed, P is
shown at the Handover step.
Step 13
Press the Release softkey to start BS release, or press the
On
Hook
button on the mobile phone to start MS release.
After the release process is completed, the screen will return to
the [Stand-by] screen. You can also display a [Graph/Value]
screen from the [Stand-by] screen.
Figure 4-37 [Measuring] Summary Screen (GSM Mode)