User manual

4-26 N9360A Multi UE Tester GSM User Manual
4 Operating Procedures
Step 8
Press the Return and then the Te st Co n d i t i on softkey to display the
[Configuration: Test Condition] screen as Figure 4-17 to set the
test condition.
Step 9
Set the fields of the test parameters as shown in the left side of
Figure 4-17 with the CURSOR CONTROL knob.
Step 10
Set appropriate test limits in the cells of the test item table in
the right side of Figure 4-17.
Step 11
Repeat Step 10 to Step 11 to set the test condition for DCS1800
after replacing
GSM900 and DCS1800 in Radio System field.
Figure 4-17 [Configuration: Test Condition] Screen