User manual

4-22 N9360A Multi UE Tester GSM User Manual
4 Operating Procedures
Step 3
Enter the appropriate attenuation values, depending on the
traffic channel, in the
ATT In and ATT Out fields with the
CURSOR CONTROL knob. These values are effective for the RF
tests in the test flow.
Step 4
Press the Return softkey twice to return to the [Initial] screen.
Testing a Dual Band Mobile Phone by Automatic Test
This section describes the operation method of the Tester and a
dual band (GSM900 and DCS1800) mobile phone under the test
by Automatic Test.
Figure 4-13 [Configuration: Test Sequence] Screen