User manual

Operating Procedures 4
N9360A Multi UE Tester GSM User Manual 4-13
Changing Magnification Softkey
Press the CURSOR CONTROL knob to select a numeric input
field, such as channels and relevancies of amplitude. A changing
magnification softkey as in Figure 4-8 is displayed with memory
softkeys. A selected magnification is underlined.
Pressing this softkey changes the multiplier from 1 to 1000.
Rotating the CURSOR CONTROL knob clockwise changes the
numeric value in the field by an increment, and
counterclockwise changes the value by a decrement. The
following multiplies are variable.
•
×1: Increment or decrement by 1.
•
×10: Increment or decrement by 10.
•
×100: Increment or decrement by 100.
•
×1000: Increment or decrement by 1000.
Selection of System
On this screen, select a system from GSM and W-CDMA.
Turn on the Tester. The [Top Menu] screen is displayed as
Figure 4-9.
Figure 4-8 Changing Magnification Softkey
NOTE
This N9360A GSM User Manual describes only the GSM system. Refer to
the N9360A W-CDMA User Manual about the W-CDMA system.