User manual

Operating Procedures 4
N9360A Multi UE Tester GSM User Manual 4-11
Step 6
The memory softkey menu returns to the state in Step 2 showing
the value newly stored.
Step 7
Press the CURSOR CONTROL knob to set the value into the
field. The softkey menu returns to that of Step 1.
Step 8
Repeat the procedure from Step 1 to Step 7, if required.
Recalling Numeric Values
Step 1
Move the cursor to one of the numeric input fields of channels
or relevancies of amplitude.
Step 2
Press the CURSOR CONTROL knob to select the field. The
softkey menu displayed as shown in Figure 4-7. The four
memory softkeys show the values previously stored in the
memories if any.