User manual

Troubleshooting 6
N9360A Multi UE Tester GSM User Manual 6-7
Error Codes for Error Screens
Table 6-3 and Table 6-4 list error codes for [Error] screens. If
the following guidelines do not help you to remove the errors,
contact the Agilent Sales Department or an authorized
distributor.
Figure 6-1 An Example of [Error] Screens
Table 6-3 Alarm Notification Error Code
Error Code Error Content Action
0000 Abnormal internal temperature Turn off power and disconnect the AC plug.
0001 The cooling fan stopped.
0002 Synthesizer unlock (Tx1) A failure of the internal reference oscillator may have occurred. Turn
off power and disconnect the AC code. If you use the external
reference signal, check if it is connected correctly.
0003 Synthesizer unlock (Tx2)
0004 Synthesizer unlock (Tx3)
0005 Synthesizer unlock (Rx1)
0006 Synthesizer unlock (Rx2)
0007 ALC alarm (Tx1) A hardware error occurred. Reboot the Tester.
0008 ALC alarm (Tx2)