User manual

5-196 N9360A Multi UE Tester GSM User Manual
5 Screen Reference
Replacing a Test Setup File
Replace the parameter files in the HDD with the data in the USB
memory device or vice versa. All the parameter files saved in
the original device are replaced.
Step 1
Insert USB memory device into the USB connector on the front
panel of the Tester.
Step 2
Press the HDD/USB softkey and select the device where the
source data is saved.
Figure 5-89 [Configuration: File Management] Delete-3 Screen
NOTE
After executing the File Replace operation, the whole data is replaced to
the new one and original parameter files may be deleted even if the file
names are different.