User manual

5-190 N9360A Multi UE Tester GSM User Manual
5 Screen Reference
Step 11
If saving is properly done, the new filename should be displayed
in the filename table with the Date and Time data that are
automatically taken from the internal clock of the Tester.
Recalling a Test Setup File
Recall one of the parameter files with the following procedure:
Step 1
If you recall a file containing test parameters from a USB
memory device, go to Step 2. Or, go to Step 3 to recall a file from
the HDD.
Step 2
Insert a USB memory device into the USB Connector to obtain
the parameter file list.
Step 3
Select a device you use to recall a test parameter file by pressing
the HDD/USB softkey. The selected device, either
HDD or USB, is
underlined.
Step 4
Move the cursor to the file number to which you want to recall
the test parameter file.
NOTE
Remove the USB memory device after returning to the [Configuration]
screen by pressing the Return softkey.
The USB memory device should not be removed while the [File
Management] screen is displayed. Otherwise, the parameter files may be
damaged.