User manual

5-184 N9360A Multi UE Tester GSM User Manual
5 Screen Reference
Softkey Menu Field
Softkey Menu 1
• Save: Saves a file including all test parameters which are
currently set into the HDD or a USB memory device.
Refer to Saving a Test Setup File on page 184.
• Recall: Recall one of the test parameter files from the HDD or
a USB memory device into the Tester. Refer to Saving
a Test Setup File on page 184.
• Delete: Deletes the test parameter file selected by the
CURSOR CONTROL knob. Refer to Deleting a Test
Setup File on page 193.
• HDD/USB: Selects the HDD in the Tester or a USB memory
device.
• More (1 of 2): Displays the softkey menu 2.
• Return: Returns to the [Configuration] screen.
Softkey Menu 2
• Print Screen: Prints a hardcopy of the screen or saves a graphic
file of the screen in a USB memory device
depending on the setting of the Printer input
field on the [Configuration] screen.
• File Replace HDD <- USB: Copies the Test Setup files of HDD to
the USB memory device.
• File Replace HDD - > USB: Copies the Test Setup files of the USB
memory device to HDD.
• Undo: Cancels the above file replacement operation and
returns to the original state.
• More (2 of 2): Returns to the softkey menu 1.
Saving a Test Setup File
Save a new parameter file with the following procedure:
Step 1
If you save a file including all parameters that are currently set
in a USB memory device, go to Step 2. Or, go to Step 3 to save a
file to the HDD.