User manual

Screen Reference 5
N9360A Multi UE Tester GSM User Manual 5-183
Configuration: File Management
When the File Management softkey is pressed on the
[Configuration] screen, the screen as Figure 5-78 is displayed.
All parameter files are listed in the table.
You can save/recall a parameter file to/from the following two
devices:
• A USB memory device
• HDD in the Tester
Select the device you want to use by pressing the HDD/USB
softkey.
ORFS SW Sets a high measurement limit. The allowable range is from -99.9 to 0.0 dBm in
0.1 dB steps.
Table 5-79 Configuration: Test Condition Measurement Item
Measurement Item Description
NOTE
If you use a USB memory device, insert a proper USB memory device into
the USB Connector on the front panel of the Tester.
Figure 5-78 [Configuration: File Management] Screen