User manual

Screen Reference 5
N9360A Multi UE Tester GSM User Manual 5-169
Configuration Screen
When the Configuration softkey is pressed on the [Initial] screen,
the [Configuration] screen as Figure 5-74 is displayed.
The following various condition are set on the [Configuration]
screen:
• Execution sequence of Automatic Test
• Test parameters
• Relevant to I/F
• Other setting
NOTE
For numeric value entry, the changing magnification softkey is available.
Refer to
Storing Numeric Values on page 8 and Changing Magnification Softkey on
page 13.
Figure 5-74 [Configuration] Screen