User manual

5-168 N9360A Multi UE Tester GSM User Manual
5 Screen Reference
Configuration
Feature of Configuration
In this mode, there are four major functions as follows:
Configuration
Test Sequence Configuration
Test Condition Configuration
File Management
Table 5-73 [Signal Generator] Screen Input Field
Input Field Description
Procedure Displays a list of parameter file names stored in the Tester.
If the Tester is using a parameter file, the file name is displayed in this field. If the Tester contains
parameter files, a list of those filename is displayed in this field for selection.
Radio System Selects a radio system from GSM850, GSM900, DCS1800 and PCS1900.
RFCH
*
Sets the broadcast control channel number.
The allowable range is as follows:
GSM850: 128 to 251
GSM900: 0 to 124 and 955 to 1023
DCS1800: 512 to 885
PCS1900: 512 to 810
Amplitude Sets the RF output level. The allowable range is from -110.0 to -20.0 dBm in 0.1 dB steps.
Modulation
Selects one of the following modulation modes:
•
GMSK:BCCH: Sets the data of BCCH during call connecting.
• GMSK:PN9: Modulates RF signal in GMSK modulation and outputs with a 9-step pseudorandom
binary sequence noise.
• GMSK:PN15: Modulates RF signal in GMSK modulation and outputs with a 15-step pseudorandom
binary sequence noise.
• GMSK:All0: Modulates RF signal in GMSK modulation and outputs with all-zero data.
• GMSK:All1: Modulates RF signal in GMSK modulation and outputs with all-one data.
• 8PSK:PN9: Modulates RF signal in 8PSK modulation and outputs with 9-step pseudorandom binary
sequence noise.
• 8PSK:PN15: Modulates RF signal in 8PSK modulation and outputs with 15-step pseudorandom binary
sequence noise.
• AM: Applies AM modulation to carrier.
Offset
*
Sets frequency offset of the output signal. The allowable range is -100.0 to +100.0 kHz in 0.1 kHz
resolution.
* The toggling magnification softkey menu is displayed. Refer to Storing Numeric Values on page 8 and Changing Magnification Softkey
on page 13.