User manual

5-166 N9360A Multi UE Tester GSM User Manual
5 Screen Reference
Signal Generator
Feature of Signal Generator
The Tester is capable to generate RF signal dedicated to the
radio system GSM850, GSM900, DCS1800, and PCS1900.
When the Signal Generator softkey is pressed on the [Initial], the
[Signal Generator] screen as Figure 5-73 is displayed.
RBW Selects either 10 kHz or 30 kHz resolution bandwidth as follows:
• 10: Sets the resolution bandwidth to 10 kHz.
• 30: Sets the resolution bandwidth to 30 kHz.
Offset Sets frequency offset of the output signal. The allowable range is -100.0 to +100.0 kHz in 0.1 kHz
resolution.
* The changing magnification softkey is available. Refer to Storing Numeric Values on page 8 and Changing Magnification Softkey on
page 13.
Table 5-72 [TX Analyzer] Spectrum Monitor Screen Input Field
Input Field Description
NOTE
For numeric value entry, the changing magnification softkey is available.
Refer to
Storing Numeric Values on page 8 and Changing Magnification Softkey on
page 13.