User manual

3-4 N9360A Multi UE Tester GSM User Manual
3 Overview
Features
Easy-to-operate Automatic Test
The tests from call processes to the radio performance tests are
executed automatically with easy operation. Each test item in
Automatic Test can be set to either
On or Off. Testing time can
be shortened by setting the unnecessary test items to
Off.
Shortening of Testing Time
In Automatic Test, tests are executed while preset traffic
channels are automatically handed over. Consequently,
re-testing for each traffic channel is not required and testing
time can be shortened.
Various Test Functions
Besides Automatic Test, Manual Test, Signal Generator and
Spectrum Monitor, functions such as GPRS (CS1, CS2, CS3 and
CS4), EGPRS (Option G03, MCS1-9) and SMS are added to this
product. Therefore, this product can meet the needs in every
inspection process.
Extensive Interfaces
Ethernet, USB, GP-IB and Serial port are prepared. The USB
ports are used to connect a printer or a USB memory device for
firmware update or saving and restoring parameters. Ethernet,
GP-IB, and Serial are used for remote control.
Remote Control Ethernet
GP-IB (option)
Serial (option)
* P1, P2 is valid for all. P3 is valid only when the Coding Scheme is set to MCS3, MCS4, MCS7, MCS8, and MCS9.
Table 3-1 Main Functions
Function Description