User manual

Screen Reference 5
N9360A Multi UE Tester GSM User Manual 5-153
The measurement items are shown in the screen field.
EVM
The RMS, Peak, 95 %, Frequency Error, and Origin Offset are
shown along with the marker readout if the marker is activated.
If the measured data exceeds the limits on the graph, one or
more white triangle markers indicate the failed position at the
top of the graph frame.
Any data indicating a failure is highlighted.
Table 5-65 [TX Analyzer] Phase Error/Frequency Error Screen Field
Screen Field Description
Phase RMS Measured Phase Error (RMS) and the HI Limit are shown. The HI Limit is set on the
[Configuration: Test Condition] screen.
Phase Peak Measured Phase Error (Peak), the HI and the LO Limit are shown. A set of the HI the LO Limit is
set on the [Configuration: Test Condition] screen.
Marker Measured Phase Error at the marker position, the HI and the LO Limit are shown. Measured data
is shown when the marker is placed on the measurement trace. The HI Limit is set on the
[Configuration: Test Condition] screen.
Freq. Err Measured Frequency Error, the HI and the LO Limit are shown. The HI and the LO Limit are set on
the [Configuration: Test Condition] screen.