User manual

Screen Reference 5
N9360A Multi UE Tester GSM User Manual 5-133
The measurement result is displayed in the screen field.
Spectrum Monitor
The RF spectrum of the packet data traffic channel can be
measured by Spectrum Monitor. The spectrum, which is
measured from f
c
to f
c
+ 400 kHz relative to the packet data
traffic channel frequency, is shown with readouts at +200 kHz
(M1) and +250 kHz (M2) offsets.
PWR CNTL
*
Sets one of the factors defined for Power Control Levels according to the Radio System. The allowable
range is as follows:
GSM850, GSM900: 2 to 19 (+39dBm to +5dBm)
DCS1800: 29 to 15 (+36dBm to 0dBm)
PCS1900: 30 to 15 (+33dBm to 0dBm)
Set the MS Power Class on the [Configuration: Test Condition] screen for the power class of the mobile
phone. If the mobile phone does not support the power control function, measurement result is not
displayed.
BS Level
*
Sets the RF output level of the Tester.
The allowable range is from -110.0 to -50.0 dBm in 0.1 dB steps.
* The changing magnification softkey is available. Refer to Storing Numeric Values on page 8 and Changing Magnification Softkey on
page 13.
Table 5-56 [Manual Test] EGPRS Mode ORFS Screen Input Field
Input Field Description
Table 5-57 [Manual Test] EGPRS Mode ORFS Screen Field
Screen Field Description
Modulation Displays measured Modulation value of carrier frequency at +400 kHz (Upper) and –400 kHz
(Lower).
Switching Displays measured Switching transient value of carrier frequency at +400 kHz (Upper) and –400
kHz (Lower).
Modulation Type The Modulation Type is shown.
Ref. Power The power at the time of measurement is shown.