User manual

5-122 N9360A Multi UE Tester GSM User Manual
5 Screen Reference
Softkey Menu Field
Softkey Menu 1
• Knob Cur/Marker: Selects the function of the CURSOR
CONTROL knob from
Cur (cursor) and
Marker.
• Marker Coar/Fine: Selects the marker control from
Coar
(coarse) and
Fine to move the marker
with 10 dots (coarse) or 1 dot (fine)
resolution. The marker readout for the
phase error magnitude and timeslot (in
bits) is available at any point of the
measured trace.
• Trigger Sing/Cont: Selects the trigger mode from
Sing (single)
and
Cont (continuous).
•The
Sing mode setting provides single
measurement.
•The
Cont mode setting provides
continuous measurement.
•To start continuous measurement on the
[Measuring] screen, change the trigger
mode from
Sing to Cont.
•To terminate continuous measurement on
the [Measuring] screen, change the trigger
mode from
Cont to Sing.
•This softkey is effective only for changing
the trigger mode on the [Stand-by] screen.
• Trigger: Starts single measurement. This softkey is inactivated
on the [Stand-by] screen.
• More (1 of 2): Displays the softkey menu 2.
• Return: Returns to the previous screen.
Softkey Menu 2
• Print Screen: Prints a hardcopy of the screen or saves a graphic
file of the screen in a USB memory device
depending on the setting of the Printer input
field on the [Configuration] screen.
• More (2 of 2): Returns to the softkey menu 1.