User manual

Screen Reference 5
N9360A Multi UE Tester GSM User Manual 5-119
•The Sing mode setting provides single
measurement.
•The
Cont mode setting provides
continuous measurement.
•To start continuous measurement on the
[Measuring] screen, change the trigger
mode from
Sing to Cont.
•To terminate continuous measurement on
the [Measuring] screen, change the trigger
mode from
Cont to Sing.
•This softkey is effective only for changing
the trigger mode on the [Stand-by] screen.
• Trigger: Starts single measurement. This softkey is inactivated
on the [Stand-by] screen.
• More (1 of 2): Displays the softkey menu 2.
• Return: Returns to the previous screen.
Softkey Menu 2
• Print Screen: Prints a hardcopy of the screen or saves a graphic
file of the screen in a USB memory device
depending on the setting of the Printer input
field on the [Configuration] screen.
• More (2 of 2): Returns to the softkey menu 1.
Screen Field
Set the input fields of the following parameters to execute a new
test.
Table 5-48 [Manual Test] EGPRS Mode Peak TX Power/ Burst Timing/Power Ramp Screen Input Field
Input Field Description
Procedure Displays a list of parameter file names stored in the Tester.
Select a file to recall for a test.
If the Tester is using a parameter file, the file name is displayed in this field. If the Tester contains
parameter files, a list of those filename is displayed in this field for selection.
This field cannot be changed on a [Measuring] screen.
Radio System Selects a radio system from GSM850, GSM900, DCS1800 and PCS1900.
This field cannot be changed on the [Measuring] screen.