User manual

5-118 N9360A Multi UE Tester GSM User Manual
5 Screen Reference
Softkey Menu Field
Softkey Menu 1
• Knob Cur/Marker: Selects the function of the CURSOR
CONTROL knob from
Cur (cursor) and
Marker.
• Marker Coar/Fine: Selects the marker control from
Coar
(coarse) and
Fine to move the marker
with 10 dots (coarse) or 1 dot (fine)
resolution. The marker readout for the
amplitude and timeslot (in bits) is
available at any point of the measured
trace.
• Zoom Off/On: Toggles the zooming function between
Off and
On. If On is selected, the rising edge, between -8
bits and
0 bits, and trailing edge, between 147
and
155 bits, of the Power Ramp waveforms
are expanded to observe the derailed test
result as shown in Figure .
• Trigger Sing/Cont: Selects the trigger mode from
Sing (single)
and
Cont (continuous).
Figure 5-57[Measuring] Peak TX Power/ Burst Timing/ Power Ramp Zoomed Screen