User manual

5-116 N9360A Multi UE Tester GSM User Manual
5 Screen Reference
Softkey Menu 2
• Print Screen: Prints a hardcopy of the screen or saves a graphic
file of the screen in a USB memory device
depending on the setting of the Printer input
field on the [Configuration] screen.
• ORFS: Displays the [Output RF spectrum] screen when
Coding Scheme is set to MCS5 to MCS9.
• Spectrum Monitor: Displays the Spectrum Monitor screen.
• More (2 of 2): Returns to the softkey menu 1.
Screen Field
The information in the screen field is displayed. Refer to
Table 5-29 [Manual Test: Stand-by] GPRS Mode Screen Input
Field on page 81 and Table 5-33 [Manual Test] GPRS Mode
Attached Screen Mobile Phone Informationon page 86. The
input field in the screen field can be changed for a new test.
Procedure to obtain a Graph/Value screen
To obtain a Graph/Value from the [Stand-by] summary screen
or the [Measuring] summary screen, follow the procedure
described below.
Step 1
Place the cursor at one of the test items by rotating the CURSOR
CONTROL knob.
Step 2
Select the test item by pressing the CURSOR CONTROL knob.
Step 3
Either a measurement result list or a graph with a measurement
result list is displayed according to each measurement item.
Measuring cannot be executed on the Graph/Value screen
obtained from the [Stand-by] screen because the call connection
between the mobile phone and the Tester is disconnected.