User manual

5-114 N9360A Multi UE Tester GSM User Manual
5 Screen Reference
•The Sing mode setting provides single
measurement. When the trigger mode is
changed from
Sing to Cont, the
continuous measurement starts.
•The
Cont mode setting provides
continuous measurement. When the
trigger mode is changed from
Cont to
Sing, the measurement is terminated.
Summary Screen
After completion of the measurement in the Connected step, the
disconnect process starts, and then a [Measuring] summary
screen showing measurement results is automatically displayed.
To end the measurement in the attached status, press the End
softkey to start the detach process.
When the detach process is completed, a [Stand-by] summary
screen as Figure 5-46 is displayed.
A measurement result and Pass/Fail result are shown right next
to each measurement item.
•
Pass: Shown on blue background when the measurement is
passed.
•
Fail: Shown on red background when the measurement is
failed.