User manual

Screen Reference 5
N9360A Multi UE Tester GSM User Manual 5-111
• More (1 of 2): Displays the softkey menu 2.
Softkey Menu 2
• Print Screen: Prints a hardcopy of the screen or saves a graphic
file of the screen in a USB memory device
depending on the setting of the Printer input field
on the [Configuration] screen.
• ORFS: Displays the [Output RF spectrum] screen when
Coding Scheme is set to MCS5 to MCS9.
• Spectrum Monitor: Displays the Spectrum Monitor screen.
• More (2 of 2): Returns to the softkey menu 1.
Screen Field
The following input field can be changed on the [Measuring]
screen. Change the input fields according to Table 5-32.
Table 5-46 [Manual Test: Measuring] EGPRS Mode Screen Input Field
Input Field Description
Measuring
mode
Sets whether or not to execute test items or each group of test items. Select On or Off.
• Peak TX Power, Burst Timing, Power Ramp
• Phase Error (RMS), Phase Error (Peak), Frequency Error
• Sensitivity/BLER
PDTCH
*
Sets a packet data traffic channel number.
The allowable range is as follows:
GSM850: 128 to 251
GSM900: 0 to 124 and 955 to 1023
DCS1800: 512 to 885
PCS1900: 512 to 810
Coding
Scheme
Sets the Coding Scheme of PDTCH data (up and down). Selects from CS1 to CS4.
Attach: Up/Down CS1: fixed
Puncturing
Scheme
Sets the Puncturing Scheme of PDTCH data (down). Selects from P1 to P3. P3 is selected only for MCS3,
MCS4, MCS7, MCS8 and MCS9.
Inc Redund Sets On or Off of the Incremental Redundancy of re-forwarding PDTCH during Test Mode: Ack test.
Averaging Displays the average value of Peak TX Power, Phase Error, and Frequency Error. Sets the averaging
number from 2 to 200, or Off. When this function is not required, select Off.