User manual

Screen Reference 5
N9360A Multi UE Tester GSM User Manual 5-107
Softkey Menu 2
• Print Screen: Prints a hardcopy of the screen or saves a graphic
file of the screen in a USB memory device
depending on the setting of the Printer input
field on the [Configuration] screen.
• ORFS: Displays the [Output RF spectrum] screen when
Coding Scheme is set to MCS5 to MCS9.
• Spectrum Monitor: Displays the Spectrum Monitor screen.
• More (2 of 2): Returns to the softkey menu 1.
Screen Fields
Set the input fields on the screen field according to the
following description of Table 5-43 to execute a new test.
Table 5-43 [Manual Test: Stand-by] EGPRS Mode Screen Input Field
Input Field Description
Measuring
mode
Sets whether or not to execute test items or each group of test items. Select On or Off.
• Peak TX Power, Burst Timing, Power Ramp
• Phase Error (RMS), Phase Error (Peak), Frequency Error
• Sensitivity/BLER
Procedure Displays a list of parameter file names stored in the Tester.
Select a file to recall for a test.
If the Tester is using a parameter file, the file name is displayed in this field. If the Tester contains
parameter files, a list of those filename is displayed in this field for selection.
Radio System Selects a radio system from GSM850, GSM900, DCS1800 or PCS1900.
BCCH
*
Sets the broadcast control channel number.
The allowable range is as follows:
GSM850: 128 to 251
GSM900: 0 to 124 and 955 to 1023
DCS1800: 512 to 885
PCS1900: 512 to 810
PDTCH
*
Sets a packet data traffic channel number.
The allowable range is as follows:
GSM850: 128 to 251
GSM900: 0 to 124 and 955 to 1023
DCS1800: 512 to 885
PCS1900: 512 to 810
Coding
Scheme
Sets the Coding Scheme of PDTCH data (up and down). Selects from CS1 to CS4.
Attach: Up/Down CS1: fixed