User manual

5-104 N9360A Multi UE Tester GSM User Manual
5 Screen Reference
Manual Test (EGPRS Mode)
Description of EGPRS System
The Enhanced General Packet Radio Service (EGPRS), or
enhanced GPRS, employs a new modulation scheme called
EDGE (Enhanced Data GSM Environment). The scheme
employs eight phase-shift keying (8-PSK), and achieves
high-speed data transmission of maximum 236.8kbps.
Feature of Manual Test GPRS Mode
All test items are executed while the mobile phone and the
Tester are connected by call control protocol.
Setting for Manual Test EGPRS Mode in the Configuration Mode
• Loss:
The path loss value for each radio system can be set on the
[Configuration] screen to correct the RF attenuation
between the mobile phone and the Tester.
• Limits of measurement items:
Each measurement item can be measured and analyzed with
the measurement limits set on the [Configuration: Test
Condition] screen.
Slot Configuration and Measurement Slot
The combination of the slot configuration and the order of
measurement slot are follows:
NOTE
Install the Option G03 before using EGPRS function.
Table 5-42 Slot Configuration and Measurement Slot
Slot Configuration Measurement Slot
1×12
2×1, 3×13
4×14