User manual

5-90 N9360A Multi UE Tester GSM User Manual
5 Screen Reference
Step 1
Place the cursor at one of the test items by rotating the CURSOR
CONTROL knob.
Step 2
Select the test item by pressing the CURSOR CONTROL knob.
Step 3
Either a measurement result list or a graph with a measurement
result list is displayed according to each measurement item.
Measuring cannot be executed on the Graph/Value screen
obtained from the [Stand-by] screen because the call connection
between the mobile phone and the Tester is disconnected.
Graph/Value Screen
Peak TX Power/ Burst Timing/ Power Ramp
The measured data are shown in enlarged numerals.
The Power Ramp result is shown when the marker is placed at
any point on its measured trace.
If the measured data exceeds the limits on the graph, one or
more white triangle markers indicate the failed position at the
top of the graph frame.
Any data indicating a failure is highlighted.