User manual

Screen Reference 5
N9360A Multi UE Tester GSM User Manual 5-89
Softkey Menu Field
Softkey Menu 1
• Clear Status: Clears Pass/Fail results at signaling steps in the
test flow.
• Trigger Sing/Cont: Selects the trigger mode from
Sing (single)
and
Cont (continuous).
•The
Sing mode provides single
measurement in RF test.
•The
Cont mode provides continuous
measurement in RF test.
• Trigger: Starts measurement in the attached status. This
softkey is invalid in the Stand-by status but activated
in the attached status.
• More (1 of 2): Displays the softkey menu 2.
• Return: Returns to the [Initial] screen.
Softkey Menu 2
• Print Screen: Prints a hardcopy of the screen or saves a graphic
file of the screen in a USB memory device
depending on the setting of the Printer input
field on the [Configuration] screen.
• Spectrum Monitor: Displays the Spectrum Monitor screen.
• More (2 of 2): Returns to the softkey menu 1.
Screen Field
The information in the screen field is displayed. Refer to
Table 5-29 [Manual Test: Stand-by] GPRS Mode Screen Input
Field on page 81 and Table 5-33 [Manual Test] GPRS Mode
Attached Screen Mobile Phone Informationon page 86. The
input field in the screen field can be changed for a new test.
Procedure to obtain a Graph/Value screen
To obtain a Graph/Value from the [Stand-by] summary screen
or the [Measuring] summary screen, follow the procedure
described below.