User manual

Screen Reference 5
N9360A Multi UE Tester GSM User Manual 5-83
The information from the mobile phone is displayed on the left
side of the screen:
The RF On indicator is displayed at the lower left side corner of
the screen only when the RF signal from the Tester is present at
the RF IN/OUT connector.
Message Field
The following message is displayed on the [Stand-by] screen:
Press the desired softkey.
Explanation
To start a test, turn the mobile phone on and wait for the Attach
step is passed. After that, the [Manual Test: Measuring]
Attached screen is displayed.
Attached Screen
After completion of the attaching process, the [Measuring]
screen as Figure 5-44 is displayed.
The Attached step in the test flow field is highlighted and P is
shown at the test result cell for the Attach step.
Table 5-31 Manual Test GPRS Mode Measurement Item
Item Information Description
IMSI Displays the default value of International Mobile Subscriber Identity. The default value is
001012345678901.
IMEI This field remains blank at this state.
Multislot Class This field remains blank at this state.
RF Power Capability This field remains blank at this state.