User manual

Screen Reference 5
N9360A Multi UE Tester GSM User Manual 5-65
Phase Error/ Frequency Error
The RMS and Peak Phase Error and Frequency Error are shown
along with the marker readout if the marker is activated.
If the measured data exceeds the limits in the graph, one or
more white triangle markers indicate the failed position at the
top of the graph frame.
Any data indicating a failure is highlighted.
Burst Timing Measured Burst Timing, the HI and the LO Limit are shown. The HI and the LO Limit are set on the
[Configuration: Test Condition] screen.
Power Ramp Measured Power Ramp, the HI and the LO Limit are shown. The limits are specified by the radio
system selected (template).
Table 5-19 [Manual Test] GSM Mode Peak TX Power/Burst Timing/Power Ramp Screen Field
Screen Field Description
Figure 5-39 [Measuring] Phase Error/ Frequency Error Screen