User manual

5-62 N9360A Multi UE Tester GSM User Manual
5 Screen Reference
Softkey Menu Field
Softkey Menu 1
• Knob Cur/Marker: Selects the function of the CURSOR
CONTROL knob between
Cur (cursor) and
Marker.
• Marker Coar/Fine: Selects the marker control from
Coar
(coarse) and
Fine to move the marker
with 10 dots (coarse) or 1 dot (fine)
resolution. The marker readout for the
amplitude and timeslot (in bits) is
available at any point of the measured
trace.
• Zoom Off/On: Selects the zooming from
Off and On. If On is
selected, the rising edge, between
-8 bits and 0
bits, and trailing edge, between
147 and 155
bits, of the Power Ramp waveforms are
expanded to observe the derailed test result as
shown in Figure 5-38.
• Trigger Sing/Cont: Selects the trigger mode from
Sing (single)
and
Cont (continuous).
Figure 5-38[Measuring] Peak TX Power/ Burst Timing/ Power Ramp Zoomed Screen