User manual

Screen Reference 5
N9360A Multi UE Tester GSM User Manual 5-55
Message Field
The following message is displayed in the message field on the
Connection screens:
Press the desired softkey.
Measuring Screen
While BS Call or MS call is connected, RF test can be executed
to measure the mobile phone before the call is released.
Caller ID Displays addresser number sent from the Tester at BS Call execution.
Dialed No. Displays the number dialed from the mobile phone. If an emergency call is made, this field
displays Emergency Call.
GSM Version Displays either Phase 1 or Phase 2 defined by the mobile phone.
Power Class Displays power class information of the mobile phone. Refer to Power Classes on page 2.
ACT Tim ADV Displays the number of bits for the actual timing advance data.
RX Quality Displays the measurement result for the received signal quality.
RX Level Displays the measurement result for the received signal level.
Table 5-17 [Manual Test: Measuring] GSM Mode Connection Screen Mobile Phone Information
Item Information Description