User manual
5-54 N9360A Multi UE Tester GSM User Manual
5 Screen Reference
The information from the mobile phone as Table 5-17 is
displayed on the left side of the screen.
TCH
*
Sets a traffic channel number.
The allowable range is as follows:
GSM850: 128 to 251
GSM900: 0 to 124 and 955 to 1023
DCS1800: 512 to 885
PCS1900: 512 to 810
If the channel number is changed in the Connection state, handover is executed.
Timing ADV Sets a value for the timing advance ranging from 0 to 63 bits in 1 bit step.
Caller ID Displays addresser number sent from the Tester at BS Call execution.
PWR CNTL Sets one of the factors defined for Power Control Levels according to the Radio System. The allowable
range is as follows:
GSM850, GSM900: 2 to 19 (+39dBm to +5dBm)
DCS1800: 29 to 15 (+36dBm to 0dBm)
PCS1900: 30 to 15 (+33dBm to 0dBm)
Set the MS Power Class on the [Configuration: Test Condition] screen for the power class of the mobile
phone. If the mobile phone does not support the power control function, measurement result is not
displayed.
BS Level
*
Sets the RF output level of the Tester, ranging from -110.0 to -50.0 dBm in 0.1 dB step. The
default value is set on the [Configuration: Test Condition] screen.
Con Mode Selects Talk or Test.
• Talk: Loops back voice from the mobile phone until RF test is started.
• Test: Transmits data (such as PN9, PN15, etc.) set in the Data field on the [Configuration: Test
Condition] screen in the connection status.
Test Loop Selects Test Loop, when Con Mode is set to Test.
Test Loop A: BER measurement
Test Loop C: Fast BER measurement
Averaging Displays the average value of Peak TX Power, Phase Error, and Frequency Error. Sets the averaging
number from 2 to 200, or Off. When this function is not required, select Off.
* The changing magnification softkey is available. Refer to Storing Numeric Values on page 8 and Changing Magnification Softkey on
page 13.
Table 5-16 [Manual Test: Stand-by] Screen GSM Mode Input Field
Input Field Description
Table 5-17 [Manual Test: Measuring] GSM Mode Connection Screen Mobile Phone Information
Item Information Description
IMSI Displays the International Mobile Subscriber Identity from the mobile phone.
IMEI Displays the International Mobile station Equipment Identity from the mobile phone.